



Introduction
The Chinese brand “JH TOYS INDUSTRIAL CO., LIMITED” once again delighted UAV enthusiasts with the introduction of the Cheerson CX-22 drone. The drone got its start from the famous Cheerson CX-20 model, and many pilots around the world managed to like it.
From the previous model, the drone inherited only the best. The developers subtly listened to the opinion of consumers, as a result they significantly improved the quality of the plastic, installed two GPS modules for more accurate positioning, equipped the FPV kit with recording video in FullHD quality, installed a 2-axis gimbal for the new FHD camera and finalized the software. As a result, the user gets a drone that is good by modern standards for amateur aerial photography.
Review
The flight characteristics of the Cheerson CX-22 are, as always, on top. Separately, wind resistance and vertical traction can be distinguished. These figures significantly distinguish the CX-22 from the CX-20. Thanks to the controller and the OSD module, the monitor that comes with the kit will display flight data telemetry and a number of equally important control parameters.
You can buy the CX-22 in two trim levels: “CX-22 Standard accessories” and “CX-22 A Set”. The first set includes the maximum package (drone case + drone + remote control + 7 inch FPV monitor + 1080P camera + 2-axis camera gimbal + 5.8G transmitter + 5.8G receiver + 8GB memory card + battery and chargers devices for the monitor and the drone itself).
The second set is budget and includes only CX-22 quadcopter (without gimbal and camera), remote control (without monitor), drone battery and charger, everything comes in a standard carton box. This set is suitable for pilots who cannot afford to purchase the complete set at once.
- The CX-22 is available in two trim levels
- The budget set can be retrofitted with all the missing options.
- The manufacturer offered 3 retrofit kits.
JH TOYS offered 3 retrofit kits: “CX-22 B Set Camera + Monitor”, “CX-22 C Set Camera” and “CX-22 D Set Monitor”. In the first retrofit kit, the buyer will receive all the missing options at once (1080P camera, 2-axis gimbal, 5.8G transmitter / receiver, 7-inch FPV monitor, monitor battery, charger, 8 GB memory card). The second kit differs from the first one in that it does not include a monitor and a 5.8G receiver. The third retrofit kit contains only a 7-inch monitor, a 5.8G receiver, a battery for the monitor and a charger.
Modes and functions
- Altitude hold mode
- Headless mode
- “Return to Home” function (now you don’t have to worry if the connection with the drone is lost, it will automatically return to the place where the control equipment is located and make a soft landing)
- Follow me feature
- Fly Around Object Feature
In all cases, the drone will shoot high-quality photo and video material even in low light conditions.
Drone color scheme: White-Blue; Black-Orange; White-Orange;
Equipment
- Quadcopter Cheerson CX-22
- Li-polymer battery 3S 11.1V 5400mAh 20C (included)
- Remote control (powered by 4 AA 1.5V batteries not included)
- rotors
- 2-axis gimbal for FHD camera
- 1080P HD camera
- 8GB microSD card
- 1 × USB microSD card reader
- AV cable
- 7 inch FPV TFT monitor
- Monitor battery 2S 2000mAh LiPo with JST connector (included)
- 2 × 5.8G dipole antennas
- Battery charger for monitor
- Drone Battery Charger
- USB cable for drone battery charging
- Mounting screws
- Tool
- Drone transport case
- Instruction
CX-22 Standard
CX-22 A Set
Appearance
Specification
GPS:
yes (2 modules in the remote control and in the drone itself)
FPV:
there is
Function “Return home»:
there is
Function “Control distances»:
there is
Function “Flight around a given object”:
there is
Maximum range flight:
over 800 meters
Function “Follow per me»:
there is
Mode “Headless»:
there is
Mode “Holds heights»:
there is
Permission cameras:
1080p
Type of carrier:
microSD card (eightGB)
Frequency transmission AV signal:
5.8GHz
Quantity channels:
32 channels
Frequency radio signal:
2.4 GHz
Quantity channels:
4 channels
FPV display:
7 inch LCD monitor
Type of batteries drone:
3S 11.1V 5400mAh LiPo
Time flight:
up to 25 minutes
Time charging:
≈ 3 hours
Stabilization:
6 axis gyroscope
Motors:
brushless type #2216 BLDC
Backlight drone:
LED
The weight:
700gr.
Dimensions drone:
40×40×21.5cm.
Wednesday for flights:
indoor / outdoor
GPS module
There are two Beitian BN-800(880) modules installed on the Cheerson CX-22, one in the console and the other on the drone itself. Excellent friends with GLONASS. There were no complaints in the work.
Accumulator battery
The Cheerson CX-22 Lithium Polymer battery has an impressive 3S 11.1V 5400mAh 20C performance. It takes approximately 3 hours to charge with a flight time of up to 25 minutes. It has a light indication of the battery charge, which is very handy. Users note the tendency of the battery to fail, most likely due to marriage (decided by replacing it with a new one).
transmitter
The Cheerson CX-22 comes with an excellent 4-channel transmitter operating at a frequency of 2.4GHz. Provides a flight range of more than 800 meters. The remote comes with a built-in GPS module. Powered by 4 AA batteries, not included.
Monitor
7 inch high definition TFT LED monitor with built-in 5.8GHz video module. In addition to the online picture from the drone’s camera, the OSD module displays all the comprehensive control information about the flight on the display. Interference resistant. Comes with a light shield.
Specification
Diagonal monitor:
17.78cm. (7 inches)
Razrewmonitor:
800×480p
Brightness:
adjustable 450cd/m²
Corner review:
140/120
Entrance/exit:
AV
Food:
DC 7-24V or 2S-6S LiPo
Camera
The Cheerson CX-22 is equipped with an FHD camera coupled with a 2-axis gimbal. As a result of such a compilation, the output is a stable high-quality picture even in low light conditions.
Specification
Video:
1080P 1920 × 1080 at 30 fps, 720R 1280 × 720 at 60 fps, 960R 1280 × 960 at 30 fps, 720R 1280 × 720 at 30 fps, WVGA 848 × 480 at 30 fps
Permission cameras:
12MP
Dimensions cameras
54x68mm.
Format video:
mov H.264
Corner review:
90º + 45º
Permission a photo:
16M/12M/8M/5M/3M
Frequency updates monitor
50Hz/60Hz
Food:
5V/1A
Conclusion
Cheerson CX-22


pros
- Execution quality
- Brushless Motors/Flight Performance
- FPV Kit/Telemetry
- 5.8G module for 32 channels
- FHD camera on 2-axis gimbal
- 2 × GPS modules / flight range
- Battery charge indication
- Will return if the battery is low
- Follow me/Flying around the control equipment
- Altitude Hold
Minuses
- Battery powered remote control
- Heavy bullets (with monitor over 1kg)
- Flight time in fact 15-17 minutes
- Batteries are not reliable, failures occur
- One battery is not enough
- Price
The CX-22 quadcopter is suitable for amateur pilots who choose a drone for beautiful and large-scale aerial photography. Excellent dynamics, good photo/video quality even in low light conditions, as well as a set of modes and functions that premium drones have, bring this UAV into the segment of desired devices. To date, the unreasonably high price for a drone is embarrassing, which allows you to purchase premium DJI Mavic Pro and Mavic Air quadrocopters with these funds, which have a significant advantage, both in terms of manufacturability and quality of shooting over the drone presented in the review.
A photo
Photo with CX-22 quadcopter.
Video
Video with CX-22 quadcopter.