



CineLog35 Performance
A well-known and respected hobby developer GEPRC recently introduced an advanced series of CineWhoop drones. CineLog35 Performance is an improved series of CineWhoop quads, which consists of three versions of FPV drones: VISTA Nebula PRO, AVATAR HD 1080P and ANALOG.
The CineLog35 Performance is a well-executed, optimized and improved series built on the popular standard predecessor CineLog35, whose hallmark is such features as impressively low weight and maximum flight duration. The concept of the Performance Series is to maximize racing performance and achieve excellence on an existing frame.
Major Improvements
The new series received an updated power system, using the latest GEPRC F722-45A AIO flight system in tandem with a new power plant, which consists of four GEPRC SPEEDX2 2105.5 electric motors, providing more power output and faster response compared to its predecessor.
This approach made it possible to significantly facilitate flights with full-size GoPro cameras up to the performance of complex aerobatic maneuvers. Thus, CineLog35 Performance can fully meet all the requirements of the creators of dynamic video content from the air to achieve a higher level of filming quality.
To ensure better visualization, each of the versions included in the CineLog35 Performance series received its own set of FPV systems:
- CineLog35 Performance AVATAR: FPV camera (Walksnail CAM); VTX (AVATAR — Walksnail’s new digital system)
- CineLog35 Performance VISTA Nebula Pro: FPV camera (Caddx Nebula Pro); VTX (VISTA is a lightweight digital system from Caddx)
- CineLog35 Performance Analog: FPV camera (Caddx Ratel2); VTX (40ch 5.8GHz VTX GEPRC RAD 5.8G 1.6W switchable power: PIT mode/25/200/600/1600mW)
Key features
- Assembled, pre-configured and tested by the developer
- Available in three versions: Analog/VISTA/AVATAR
- Drone flight weight with recommended 6S power supply (Analog/VISTA/AVATAR): 257.9/258.1/253g
- Frame: GEP-CL35 Performance (3K carbon)
- PC: high performance flight system based on GEPRC F722-45A flight controller in AIO format with integrated speed controllers BLHeli_S 45A 6S ESC
- Motors: B/K GEPRC SPEEDX2 2105.5; Location type: push (motors down)
- Props: 3‑bladed HQProp DT90MMX3
- FPV (Analog version): FPV camera (Caddx Ratel2); VTX (40ch 5.8GHz VTX GEPRC RAD 5.8G 1.6W switchable power: PIT mode/25/200/600/1600mW)
- FPV (VISTA version): FPV camera (Caddx Nebula Pro); VTX (VISTA is a lightweight digital system from Caddx)
- FPV (AVATAR version): FPV camera (Walksnail CAM); VTX (AVATAR — Walksnail’s new digital system)
- Equipped with an axisless gimbal (for action cameras) with shock-absorbing rubber dampers, providing more stable and clear shooting without jelly
- Recommended payload: GoPro (up to version 10); Insta 360 GO2 and Caddx Peanut
- Recommended Power: 6S 850/1550mAh LiPo
- Max. cruising/steady flight time: 5 min 30 sec (with GoPro 10); 7 min 30 sec (no payload)
- Available receivers: Frsky R‑XSR, TBS Nano RX, ELRS2.4G; Also available without receiver (PNP)
Equipment
All three versions will include:
Specification
Drone
Brand:
GEPRC
Model:
CineLog35 Performance
Frame:
GEP-CL35 Performance
Diagonal frame size:
142 mm
Top plate thickness:
2.5mm
Bottom plate thickness:
2.0 mm
beam thickness:
3.5mm
PC
Flight system:
GEP-F722-45A AIO
MCU:
STM32F722
IMU:
6 axis
OSD:
BetaFlight OSD w/AT7456E Chip
ESC:
BLheli_S 45A
VTX
VTX (Analog version):
40CH 5.8GHz VTX GEPRC RAD 5.8G 1.6W switchable power: PIT mode/25/200/600/1600mW
VTX (VISTA version):
Caddx VISTA
VTX (AVATAR version):
walksnail avatar
VTX antenna (Analog version):
GEPRC Momoda 5.8G Antenna Long Version
VTX antenna (VISTA version):
GEPRC Momoda 5.8G UFL LHCP 175mm Long Version
VTX antenna (AVATAR version):
Walksnail Momoda 5.8g UFL
fpv camera
FPV camera (Analog version):
Caddx Ratel2
FPV camera (VISTA version):
Caddx Nebula Pro
FPV camera (AVATAR version):
walksnail cam
Power point
Motors:
GEPRC SPEEDX2 2105.5; Location type: push (motors down)
Propellers:
3‑bladed HQProp DT90MMX3
Food
Recommended food:
6S 850/1550mAh LiPo
Receivers
Available receivers:
PNP, Frsky R‑XSR, TBS Nano RX, ELRS2.4G
Appearance
VISTA Nebula PRO
analog
Recommended payload
Payload recommended by the developer:
Comparison tables
In the tables below, the developer demonstrates the key superiority of the new series over its predecessor:
CineLog35 Performance VISTA vs CineLog35 VISTA
CineLog35 Performance Analog vs CineLog35 Analog
Price and availability
As of July 11, two of the three possible versions of CineLog35 Performance are available for purchase in the developer’s online store: VISTA and Analog. The AVATAR version will be available from July 15th. Depending on the selected version and receiver, the prices for the drone are arranged in the following order:
ANALOG
- PNP — $319.99
- FrSky R‑XSR — $329.99
- TBS Nano RX — $337.99
- ELRS 2.4G — $329.99
VISTA
- PNP — $439.99
- FrSky R‑XSR — $456.99
- TBS Nano RX — $464.99
- ELRS 2.4G — $456.99
Avatar
- PNP — $429.99
- FrSky R‑XSR — $447.99
- TBS Nano RX — $455.99
- ELRS 2.4G — $447.99
Video
From users
Flight test CineLog35 Performance VISTA Nebula PRO.